| From | Message |
fh
Dodge Dakota
JOIN HERE
4/23/2005
16:19:36
|
 Subject: DynaMax 17748 Question
IP: Logged
Message:
I know the DynaMax 17748 is 2.5 in and 2.5 out. I have 2.5 inch tail pipe and 2.5 inch pipe from the Cat. Is the Muffler flaired or do I need to buy a muffler with 2.75 in and out. I don't want to take the existing muffler off to measure until I'm ready to change it.
|
Alec
Dodge Dakota
JOIN HERE
4/23/2005
16:55:11
| RE: DynaMax 17748 Question
IP: Logged
Message:
Already have that exact muffler. Sounds awesome on my 3.9. I highly reccomend it.
|
slips in
Dodge Dakota
JOIN HERE
4/24/2005
17:40:33
| RE: DynaMax 17748 Question
IP: Logged
Message:
slips right in with out a single mod if that is what you are asking
|
fh
Dodge Dakota
JOIN HERE
4/24/2005
19:42:44
| RE: DynaMax 17748 Question
IP: Logged
Message:
Yeah, I just thought if the in and out were exactly 2.5 and the other pipes were exactly 2.5 it won't slip in. Thanks
|
ajay
Dodge Dakota
JOIN HERE
4/24/2005
20:50:36
| RE: DynaMax 17748 Question
IP: Logged
Message:
all about the I/D and O/D my friend
|
fseventy
Dodge Dakota
JOIN HERE
4/27/2005
02:20:20
| RE: DynaMax 17748 Question
IP: Logged
Message:
Man, sure is a lot of attitude on this board, and not much discriptive help....
I crawled under my 98' today to scope out the muffler situation. Here is what is going on. The stock exhaust pipe OUTER diameter before the muffler is 2.5 inches. The stock muffler, and I assume aftermarket as well, probably has a 2.5 or slightly larger INNER diameter and it slips right over the exhaust pipe and is held in place with an exhaust clamp that is also a hanger. The exact same thing is happening at the muffler exit. It sounds like all we have to do it unbolt the stock muffler and slide in the replacement. Good luck with the rusted clamp bolts. Use lots of penetrant before starting that job.
|
fh
Dodge Dakota
JOIN HERE
4/27/2005
08:09:29
| RE: DynaMax 17748 Question
IP: Logged
Message:
Thanks, that helps a lot. Just what I wanted needed to know.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
