Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
14:45:24 - 05/19/2024

Custom Style
FromMessage
Brian Fabian
Dodge Dakota
 Email

10/30/2001
00:09:20

Subject: stereo amps
IP: Logged

Message:
I just purchased a 98 dodge dakota and I am putting my system in it. Problem is i am having the darndest time trying to figure out a good spot for my amp. Any suggestions?



Roby
Dodge Dakota
 Email

10/30/2001
02:41:41

RE: stereo amps
IP: Logged

Message:
Under the seat. How you ask? Well of corse you need to raise your seat, you simply unbolt the rear anchor bolts and slide some big a$$ washers under it. Then bolt it back down. That's what I had to do, I lifted it enough to for a Punch Power 800 and enough room for the heat to disipate(veryyyyy important). Be advised that a long amp will still stick out the back of the seat. Oh yeah, one more option, on the back of the seat. What you do is unzip the back of the seat, get a thin piece of plywood and cut to fit under the skin of the seat. run the wires under that, zip it back up and mount the amp. I used to have mine like that then when I got the punch I found out that it was a little too heavy. I went to school with a guy that mounted his amp to the roof because it had a built in neon, well one day he came to class with stiches in his forehead, I got sick I laughed sooo much.
Roby
"I pitty the fool" Mr.T



Arick
Dodge Dakota
 Email

10/30/2001
20:49:42

RE: stereo amps
IP: Logged

Message:
I just rested mine behind the middle console. That way I can get to it easily to modify the cables or setting I have it on.

I have 2 8" Rockford Fosgate punchs and 300watt Audiotek amp.


arick



Got-Speed
Dodge Dakota
 Email

11/14/2001
22:50:50

RE: stereo amps
IP: Logged

Message:
I have 2 Orion HCCA 225 amps that I mounted behind the rear seat back. Just removed the back rest, cut out whatever foam needed cutting out, slapped in the amps. I also mounted an Orion EQ, Crossover, Balanced line adapters, and Fuse blocks behind there, I just stuck the knobs towards the bottom so I could adjust them by sticking my hand down by where the seatbelts come from. In the next 2 weeks I'm gonna try installing an MTX thunderform.... Hope it sounds good w/ 2 10" Orion XTR3 DVC's !!!

Marty -=-=-=-
98 CC 318 Auto
ColdAir
No Muffler
JVC/ORION stereo
BedRug
Jet 'Chip"
Underdrive Pullies

Soon to be Lowered 3/5 Western Chassis lower control arms.



JE_502
Dodge Dakota
 Email

11/19/2001
11:45:41

RE: stereo amps
IP: Logged

Message:
I mounted my Kicker amp behind the drivers seat them put my 2 8" Solobarics behind the passenger side seat. Worked out great.



joe
Dodge Dakota
 Email

12/01/2001
10:27:28

RE: stereo amps
IP: Logged

Message:
I made a fit panel to go in the well under the left rear seat where the seat sits on there is a ledge sort of! out of 1/4 inch fiberboard , took the bottom seat out , mounted the amps to the board punch 800.2 and a punch 400.4 , they fit ! then I made a custom box the length of the left rear seat bottom 14 1/2 deep, tall and height , 29 inches long , Perfect for two kicker 12's , made legs about 3 inches high and screwed to the plate insert that sits in the well , then mounted the box to the plate insert with some brakets , this is a great way to put 2 12/s in 2 amps in and styill have the little seat to sit in , Looks awesome and pounds !



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.