Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
07:05:02 - 05/19/2024

Dakota Performance
FromMessage
toolfan
Dodge Dakota
JOIN HERE


11/01/2005
00:12:25

Subject: RE: Quarter Mile times
IP: Logged

Message:
anytime Fed, because trolls are evil and i defend the innocent from them. lol

let us know how the gear install goes.
I'm thinking of putting a posi in out of a jeep, but the gears are either going to stay at 3.55s or become 3.90s.

i want to know how hard it was to install too. i think it will be me and my uncle doing the install.



GraphiteDak
GenIII
 Email User Profile


11/01/2005
00:36:26

RE: Quarter Mile times
IP: Logged

Message:
J2, sorry i thought I made a reply but it must have errored (was using an open WiFi while at work).

Anyway. Yeah. Will most likely be going back to the track in the next couple of weeks.

Because I just ordered my 4.56 gears and LSD which should be here by this weekend!


I hope to have my 4X4 into the 15's. I could only hope.





Mikes99Dakota
GenIII
 User Profile


11/02/2005
09:38:22

RE: Quarter Mile times
IP: Logged

Message:
Trust me If you dont have your dak into the 15s, much less the mid 15s than you need to take off the 20' boat that your trailering.....hehehe

1999 RC Auto 5.2L
Mopar PPH, Magnaflow 3" w/cut-out, 3.90s/Suregrip, 50mm Fastman TB

Track Times:
9.47 @ 72.21mph
14.89 @ 91.33 mph

toolfan
Dodge Dakota
JOIN HERE


11/02/2005
09:46:09

RE: Quarter Mile times
IP: Logged

Message:
nice one mike. lol



J2
Dodge Dakota
JOIN HERE
 Email

11/02/2005
19:16:21

RE: Quarter Mile times
IP: Logged

Message:
Hey GraphiteDak. i should be back there on Fri. the 11th if not then the 24-27 i'd say. Um i am not sure exactly. let me know when there are track days or if you want just meet up somewhere in phoenix or whatever. talk to you later.

J2



GraphiteDak
GenIII
 Email User Profile


11/02/2005
22:58:49

RE: Quarter Mile times
IP: Logged

Message:
Yeah funny Mike. :) But for a 4X4 QC it's not bad.

Especially since the 2WD HEMI and TITAN barely get by me towards the end.




J2. No problem. Once I know the gears are good to go, I will plan a trip to the track.

So would you rather go to Firebird than SpeedWorld I assume? Or are you willing to drive to SpeedWorld? (Jomax and Grande Ave)





J2
Dodge Dakota
JOIN HERE
 Email

11/03/2005
01:07:58

RE: Quarter Mile times
IP: Logged

Message:
GraphiteDak, whatever track you want i can do, i am flexible. so if you can just email me directions to speedworld from I-10 cuz i know how to get to firebird. well on second thought i'll just ask my dad how to get there. he can find anything in that city. but hell if you just wanna email me or whatever then you can reach me at nascar_man2483@hotmail.com anyways i look forward to going to any track. its just i am in school mon.-fri. so i would like for it to land on a three day weekend thats why i mentioned the 11th or the 24-27. let me know. talk to you later

J2



Fed
Dodge Dakota
JOIN HERE
 Email

11/03/2005
12:37:25

RE: Quarter Mile times
IP: Logged

Message:
well,

my dad and i didnt even get to removing the spider gears and
ring 'n pinion...it was so frikin hard, you need special tools to
remove the huge pin holding the gears in place...dont know so
we gave up and spent $325 to have them installed :/

Hopefully truck is done sometime today.



J2
Dodge Dakota
JOIN HERE
 Email

11/03/2005
19:16:33

RE: Quarter Mile times
IP: Logged

Message:
Hey fred, i could be 100% completly wrong but, i think all you need is a magnet. like the one on the clips that telescopes. then you can use that to remove the c-clips when you push in your axels after you remove the spider gears or something like that. like i said i could be wrong. i am new to rear ends and mods in general.

J2



Fed
Dodge Dakota
JOIN HERE
 Email

11/03/2005
21:33:21

RE: Quarter Mile times
IP: Logged

Message:
yeah u could be right, at least it sounds correct. haha but im not worryin' bout that anymore, just got the truck back and its amazing, love how it pulls harder! but i cant really mess around cuz pops said i gotta let the LSD break in...

anyway, ran into another problem with the cheesy ass, rip off, lowering kit i got for my truck bout 6 months ago...the a-arms are always shifting forward and reverse as i break and gas it sorta of hard, not even that hard. They just tear the bushings apart.

it sucks a whole lot cuz i just got my truck back today and after a good hour of driving around i get home and this appears...RETARDED



J2
Dodge Dakota
JOIN HERE
 Email

11/03/2005
22:50:32

RE: Quarter Mile times
IP: Logged

Message:
Hey um Fed, Let me know what kit you used so i dont get it. thanks

J2



toolfan
Dodge Dakota
JOIN HERE


11/04/2005
01:11:41

RE: Quarter Mile times
IP: Logged

Message:
that happen to my friend and they forgot to tighten the camber bolts.
i would get under there and check everything but first the camber bolts.





Mikes99Dakota
GenIII
 User Profile


11/04/2005
09:26:31

RE: Quarter Mile times
IP: Logged

Message:
With 4.56gears you would prolly break into the 15s with the boat trailered.....hehehe


Was there something I said? LOL

1999 RC Auto 5.2L
Mopar PPH, Magnaflow 3" w/cut-out, 3.90s/Suregrip, 50mm Fastman TB

Track Times:
9.47 @ 72.21mph
14.89 @ 91.33 mph

Fed
Dodge Dakota
JOIN HERE
 Email

11/04/2005
12:07:10

RE: Quarter Mile times
IP: Logged

Message:
yeah...this is gonna be the 4th time we take apart and put back
together the control arms...ahah, if this time doesnt work im
either just gonna buy the drop spindles, or put the stock parts
back on :/


hey, its natural that my speedo is off after the gear installation
correct?



Fed
Dodge Dakota
JOIN HERE
 Email

11/04/2005
12:09:26

RE: Quarter Mile times
IP: Logged

Message:
oh BTW...heres the lowering kit

http://www.airbagit-store.com/product.asp?
returnURL=default.asp&ID=89915

it doesnt seem all that cheesy, i just said that because its pissing
me off how the rubber bushings keep tearing apart!





J2
Dodge Dakota
JOIN HERE
 Email

11/06/2005
02:52:25

RE: Quarter Mile times
IP: Logged

Message:
Then Fed try polyurithane bushings much stiffer and less likley to rip.

J2



Fed
Dodge Dakota
JOIN HERE
 Email

11/06/2005
22:39:02

RE: Quarter Mile times
IP: Logged

Message:
have bought them and installed...thanks for the advice, they work pretty good

so far haha


Fed



Three.9HP
Dodge Dakota
JOIN HERE
 Email

11/07/2005
06:22:35

RE: Quarter Mile times
IP: Logged

Message:
try 9.32 @ 72.56 1/8 in a 3.9 dak.



Fed
GenII
 Email User Profile


11/10/2005
12:10:53

RE: Quarter Mile times
IP: Logged

Message:
i know this probably doesnt sound right but does it ??

15.8 @ 79 mph

theres a 1/4 mile light to light 2 lane street a block away from
my house

according to my GPS which reads .25 of a mile, thats a quarter
right haahha?

'93 Dakota CC 3.9 auto
(4.10, LSD, magnaflow exhaust, K&N intake, lowered)

toolfan
Dodge Dakota
JOIN HERE


11/10/2005
12:17:39

RE: Quarter Mile times
IP: Logged

Message:
the speed should be faster than that if you run the quarter. i would say 85mph to 93mph just depending on wheel spin.

i have been think of running the 1/4 again soon and hope i run in the 15s



  <<Previous Page P 3 Next Page>>


 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.