| From | Message |
sparky
Dodge Dakota
JOIN HERE
2/08/2002
13:19:11
|
 Subject: rearend vibration
IP: Logged
Message:
I have a 94 extended cab with a 5.2 v-8. I lowered the front 2in. with belltech spindles and the rear 3in. lowering springs. I think they came from Chassis tech they came from an drop catalog company. I have installed 2 degree shims and I still get a vibration in the drive shaft. Do I need more shim or not?
Thanks
Sparky
|
brianldm
Dodge Dakota
JOIN HERE
2/09/2002
15:11:17
| RE: rearend vibration
IP: Logged
Message:
Make sure the shims are behind the axle and not in front. Also, I dont think you're supposed to use more than 2 degrees.
Im not a 100% on this though.
Brian
|
cudashoe
Dodge Dakota
JOIN HERE
2/10/2002
00:31:00
| RE: rearend vibration
IP: Logged
Message:
Check your exhaust. A small amount of contact can cause a viration. Be sure it secure everywhere.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
